Uobičajene vrste sučelja kabela za industrijske kamere su sljedeće:
1. USB sučelje
A USB interface camera is a digital camera that directly outputs digital image signals. The full name of USB is Universal Serial Bus (Universal Serial Bus). The USB interface is 4 "pins", of which 2 are power lines and 2 are signal lines. USB is a serial interface, which is hot-swappable and easy to connect. USB2.0, the transmission speed is 480Mbps, the communication distance is 5m, and 80 percent of the bandwidth is used for image transmission. USB3.0, the transmission speed is 4.8Gbps, the communication distance is 10m, and 80 percent of the bandwidth is used for image transmission. Because the USB interface camera is easy to use and has a wide range of interfaces, it is currently widely used in microscopes, scientific research experiments, portable equipment and other industries.
2. IEEE1394----FireWire sučelje
The 1394 interface, also known as "FireWire", is used to connect digital products to computers and other machines. IEEE1394 bus is a high-speed serial bus, the highest transmission speed of 1394a is 400Mbps, and the highest transmission speed of 1394b is 800Mbps. IEEE1394 supports hot-plugging, real-time data transmission, using bus structure, and plug-and-play. The 1394 interface is divided into 4 cores and 6 cores. There are two pairs of data cables in the 4 cores. In addition to the data cables, the 6 cores also include a set of power cables to supply power to external devices. The IEEE 1394 interface does not require a controller, and can achieve peer-to-peer transmission. The maximum transmission distance of 1394a is 4.5 meters, and the transmission distance of 1394b is usually 10 meters. It can be extended to 100 meters (100Mbps) under the condition of reduced data rate. Relay equipment is used. Support can further increase the transmission distance.
3. Camerlink sučelje
Protokol komunikacijskog sučelja signala digitalne slike koji je uvela AIA Association je serijski komunikacijski protokol. Usvojite standard LVDS sučelja, s velikom brzinom, jakom sposobnošću protiv-smetanja i malom potrošnjom energije. Razvijen iz tehnologije veze kanala, neki signali upravljanja prijenosom dodani su na temelju tehnologije veze kanala, a definirani su i neki povezani standardi prijenosa. Protokol prihvaća MDR-26-pinski konektor ili SDR-26-pinski konektor, koji ima karakteristike velike brzine, propusnosti do 6400Mbps, jake sposobnosti protiv smetnji i niske potrošnje energije.
4. Gige Gigabit Ethernet sučelje
Kreiran i promoviran od strane AIA (Automatde Imaging Association), to je standard sučelja kamere razvijen na temelju Gigabit Ethernet komunikacijskog protokola. Idealno za industrijske aplikacije za obradu slike za prijenos nekomprimiranih video signala preko mreže. To je standard za prijenos slika na velike udaljenosti korištenjem jeftinih kabela.
5. CoaXPress
CoaXPress je asimetrični standard velike-od točke do{1}}točke{2}}točke serijskog komunikacijskog digitalnog sučelja s brzinom prijenosa do 6,25 Gbps i udaljenosti prijenosa većom od 100 metara. Volumen prijenosa podataka je velik, udaljenost prijenosa duga, a udaljenost prijenosa i volumen prijenosa mogu se odabrati: od 50m@6.25Gbps do 170m@1.25Gbps, cijena je niska, lako se integrira i podržava vruće čepljenje.
